产品直通车

PVG整体带芯阻燃输送带

网站目今位置:网站首页 > 产品中心
  • PVG整体带芯阻燃输送带
  • 概述 (General)
    本公司的PVG织物整芯阻燃输送带采用国内先进技术,依照MT914-2008规范进行设计生产,产品质量抵达国际先进水平。
    PVG覅特resistant solid woven conveyor beot beot supplied by Shanxi is produced with advanced technology introduced from England. Its design and production are procwssed in accordance with standard MT914-2008.The product quality achieves the international advanced standard.
    2 结构(Stucture)
    本产品采用化纤与棉编织的整体带芯做骨架,经PVG糊浸渍,贴橡胶覆盖层,硫化而成
    The product consists of woven fabric dipped in PVG paste and rubber covers which are combined together by vulcanizing.
    3 用途 (Application)
    供煤矿井下及其它要求阻燃静电的场合输送物料
    For conveying materials in underground coalmines and under other conditiond where fire resistant and antistatic properties are required.
    抗湿滑性好 爬坡性能优异 Anti slide caused by wetness,good climbing capacity
    耐低温 Low-temperature resistant
    弹性好 抗挫折 Good elasticity ,anti-impact
    定负荷伸长小 适合于长距离输送 Low elongation at rated load,suitable for long distance conveying
    抗撕裂、 耐屈挠性好 Tear resistant,good flexing capacity
    使用寿命长 Long service life

    型号

    PVG

    800s

    ≥1.5

    1000s

    ≥1.5

    1250s

    ≥1.5

    1400s

    ≥1.5

    1600s

    ≥1.5

    1800s ≥1.5
    2000s ≥1.5
    2500s ≥1.5
    2800s ≥1.5

    Type

    PVG

    800s

    ≥1.5

    1000s

    ≥1.5

    1250s

    ≥1.5

    1400s

    ≥1.5

    1600s

    ≥1.5

    1800s ≥1.5
    2000s ≥1.5
    2500s ≥1.5
    2800s ≥1.5

    注:我们建议客户根据运输物料种类,粒度及其磨耗性的巨细等因素来选择差别的盖胶。
    Note;We suggest that the client should choose cover thickness according to the type the conveyed materials,granule,magnitude of the abrasion etc.
    4、主要物理性能技术参数(Main physical propenties)

    型号

    小经向强力 N/mm

    小纬向强力N /mm

    小撕裂力N

    阻燃带纵向拉断伸长率%

    阻燃带横向拉断伸长率%

    680S (四级)

    680

    265

    1100

    15

    18

    800S (五级)

    800

    280

    1200

    15

    18

    1000S(六级)

    1000

    300

    1200

    15

    18

    1250S(七级)

    1250

    350

    1600

    15

    18

    1400S(八级)

    1400

    350

    1600

    15

    18

    1600S(九级)

    1600

    400

    ---

    15

    18

    1800S(十级) 1800 400 ---
    15
    18
    2000S(十一级) 2000 400 ---
    15
    18
    2500S(十三级) 2500 450 ---
    15
    18
    2800S(十四级) 2800 450 ---
    15
    18

    Type

    Tensil transverse Serength

    Tensil longitudinal Serength

    Tensil Tear Serength

    Elongation longitudinal at Break

    Elongation transve rseat at Break

    680S (四级)

    680

    265

    1100

    15

    18

    800S (五级)

    800

    280

    1200

    15

    18

    1000S(六级)

    1000

    300

    1200

    15

    18

    1250S(七级)

    1250

    350

    1600

    15

    18

    1400S(八级)

    1400

    350

    1600

    15

    18

    1600S(九级)

    1600

    400

    ---

    15

    18

    1800S(十级) 1800 400 ---
    15
    18
    2000S(十一级) 2000 400 ---
    15
    18
    2500S(十三级) 2500 450 ---
    15
    18
    2800S(十四级) 2800 450 ---
    15
    18

    5橡胶覆盖层的物理机械性能
    Mechanical properties of covers

    型号

    拉伸强度/Mpa

    拉断伸长率%

    磨耗量/mm3

    PVG

    10.0

    350

    200

    注:老化试验后覆盖层拉伸强度拉断伸长率的变革率的值不大于老化前测定值的25%


    type

    Tensile Strength(Mpa)

    Elongation at Break%

    Abrasion(mm)

    PVG

    10.0

    350


    200


    Note:The changing ratio between the values of tensile strength and elongation atbreak before and after aging test should not esceed25%

    6粘合强度(Adhesion strength)

    试验项目

    覆盖层与带芯间

    带芯内部

    粘合强度平均值N/mm

    ≥4.00

    ---

    粘合强度 小值N/mm

    ≥3.25

    ≥6.5


    7主要平安性能(Main safety propertied)
    (1)外表电阻值:≤3x108Ω
    (2) 滚筒摩擦性能:滚筒外表温度≤325℃,并要求不呈现有焰燃烧或无焰燃烧。
    (3)酒精喷灯燃烧性能:
    具有覆盖层的试件:平均值≤3.0S 单值≤10.0S
    剥去覆盖层的试件:平均值≤5.0S 单值≤15.0S
    (4)巷道丙烷燃烧性能:未燃烧保存长度>250mm
    (5)高能量巷道丙烷燃烧试验:完全度无损坏长度段>2250mm
    8 运输和贮存(Transportation and storage)
    a. 本产品在运输和贮存中应坚持清洁,避免ag亚洲集团官方网站直射、雨雪浸淋;纺织与酸、碱、油类、增塑剂等影响产品质量的物质接触,并距离热源1米以外;贮存环境温度坚持在0~35℃之间、相对湿度在20~70℃之间为宜;且应成卷安排、不得折叠,每季度翻动一次。
    b.本产品的搬运宜采用ag亚洲集团官方网站,在搬运时注意不得将带子外圈损伤;无搬运机械,地面平整不至于损伤带子时亦可以滚动搬运;吊装搬运时推荐按图1进行,契合条件(使用具有足够强度的织物绳索)时也可以按图2进行,但不得呈现图3所示的操作。
    a .The prodct should be kept from sun irradiation .snow or rain and preveted from touching with acid,alkali,oil,plasticizer or other materials that would influence its quality.Kept at least 1meter away from heat sources .The storing tempe ratute should be keep within0~35℃,and the telative moisture with 20~70℃.Theproduct should be stored in reels and turned over once every quarter.Dont fold it.
    b.Use fork truck for transiting.;Be careful not to damage the outer circle of the belts .when transiting machines.The method show in figure 1 is recommended when transit the belts by suspending them. The method in figure 2 is also acceptable(when the used fabric rope is strong enough )and operation show in figure 3 must be avoided.

联系电话

0515-87612858
王树年

公司地点

盐都会阜宁县东益经济区
东益大道6号(东沟镇)

公司传真

0515-87613788

扫一扫进入手机站

Copyright ©2019 盐城ag亚洲集团官方网站胶带有限公司 All Rights Reserved. 苏ICP备11018467号 技术支持:思科网络
友情链接:凯时国际平台  凯时优质运营商  优发娱乐平台下载  千赢国际vip88  凯发k8官网登入